Canon imagePROGRAF W8400 Driver Manual page 22

imagePROGRAF HDI Driver Guide
3. Click the OK button.
Important
Media Thickness
Use these settings to adjust Media Thickness for the type of media and whether it is thin or
thick.
1. Select a thickness setting from the Media Thickness list in the Media Detailed Settings
dialog box.
Media Thickness presents the following items for selection.
Media
Thickness
Printer Default
Thick
Standard
Thin
2. Click the OK button.
Vacuum Strength
Select a setting for the amount of suction applied to the media.
1. Select a setting from the Vacuum Strength list in the Vacuum Strength dialog box.
Vacuum Strength presents the following items for selection.
Vacuum
Strength
Printer Default
Strongest
Strong
Standard
Weak
2. Click the OK button.
Setting Up a Print Job
If you make the margin (white space) too small, this could disturb
the print image or cause the printhead to scour the surface of some
types of media. If the printhead scours the surface of the media,
adjust the height of the printhead.
Setting Details
This item resets the value to the printer default settings.
Select this item when thick paper is loaded in the printer, or when
the printhead is scouring the surface of the media.
Select this item when printing on media or paper of normal
thickness without any problem.
Select this item when printing on thin paper, or the printout is not
clear and distinct.
Setting Details
This item resets the value to the printer default settings.
Select this setting if the paper is floating off the path with the
"Strong" setting selected.
Select this setting when curl in the media is causing it to float off
the path.
Select this setting when you are not experiencing problems.
Select this setting when printing on thin paper and the quality at the
corners of the sheet is poor.
3-9