Canon imagePROGRAF W8400 Driver Manual page 17

imagePROGRAF HDI Driver Guide
Graphics Settings
Use these settings to adjust the print mode and resolution.
1. Click the Vector Graphics below Graphics.
The Device and Document Settings sheet opens and switches to the display that
presents the graphics settings.
2. Select either Color or Monochrome.
3. Select a setting for Color Depth from the list.
Color Depth presents the following items for selection.
Mode
Color
Monochrome
4. Move the Res. slider to adjust the settings.
Res. presents the following items for selection.
Resolution
300 dpi
600 dpi
5. Click the OK button.
Custom Properties Settings
Use the Custom Properties settings to perform special settings for the HDI driver.
For more details, please refer to "Opening the Custom Properties Dialog Box" (p.3-5) and
"Custom Properties Dialog Box Functions" (p.3-5).
Setting Up a Print Job
Setting Details
16777216 (24-bit) colors
256 (8-bit) colors
2-Level grayscale
256-Level grayscale
16777216-Level grayscale
Setting Details
Print speed is faster due to the lower resolution setting. Printing
time is shorter and not as much computer memory is required.
Print speed is slower due to the higher resolution setting. Achieves
the best printing results, but printing time is longer and a large
amount of computer memory is required.
3-4