Canon imagePROGRAF W8400 Driver Manual page 7

imagePROGRAF HDI Driver Guide
11. Click the Next button.
The Add Plotter - Ports screen opens.
12.Make sure that Plot to a port is selected, select the port that you want to use for the plotter,
then click the Next button.
The Add Plotter - Plotter Name screen opens.
You can change the Plotter Name setting here, but you will normally leave
Note
it as it is and go to Step 13.
13.Click the Next button.
The Add Plotter - Finish screen opens.
14.Click the Finish button.
This completes the installation of the HDI driver.
15.Clicking the Finish button closes the Installation List and Setup Menu and ejects the User
Software CD-ROM from the CD-ROM drive.
HDI Driver Installation
1-5