Opening The Custom Properties Dialog Box; Custom Properties Dialog Box Functions - Canon imagePROGRAF W8400 Driver Manual

imagePROGRAF HDI Driver Guide

Opening the Custom Properties Dialog Box

In the Custom Properties dialog box you can perform the settings for the Media Type, Color
Matching, Brightness, and other settings.
Follow the procedure below to open the Custom Properties dialog box.
1. In the Plotter Configuration Editor dialog box, select and open the Device and Document
Settings sheet.
For more details about how to open the Plotter Configuration Editor
Note
dialog box, please refer to Chapter 3, "Opening the Plotter Configuration
Editor Dialog Box" (p.3-1).
2. Click Custom Properties.
The Device and Document Settings sheet opens and switches to the display that presents
the custom properties settings.
3. Click the Custom Properties button.
The Custom Properties dialog box opens.

Custom Properties Dialog Box Functions

This section describes how to perform the settings in the Custom Properties dialog box.
Setting Up a Print Job
3-5