Canon imagePROGRAF W8400 Driver Manual page 16

imagePROGRAF HDI Driver Guide
The procedures for setting each item are described below.
Media Source and Media Size Settings
Follow this procedure to select the media source (Cut Sheet or Roll Paper) and the media
size.
1. Press the Source and Size button below Media.
The Device and Document Settings sheet opens and switches to the display that
presents the media source and size settings.
2. From the Source list, select the media source.
3. From the Size list, select the media size.
Note
4. Click the OK button.
Setting Up a Print Job
When you change the Source setting, the Size setting returns
automatically to its default settings. Every time you adjust the Source
setting, you should also re-adjust the Size setting.
3-3