Chapter 2 Printing; Printing Procedure - Canon imagePROGRAF W8400 Driver Manual

imagePROGRAF HDI Driver Guide

Chapter 2 Printing

This section describes how to execute a print job with the HDI driver.
The description below uses printing with the AutoCAD 2004 as an example.

Printing Procedure

1. Start AutoCAD and open the image file.
2. Select Plot from the File menu.
The Plot dialog box opens.
3. On the Plot Device sheet check the Name setting under Plotter configuration and confirm
that W6400PG (the name of the printer you use) is displayed.
• If any other printer name is selected, select the name of the printer that
Note
• The names of the printers installed when the HDI driver was installed are
4. Click the Properties button.
The Plotter Configuration Editor dialog box opens.
Printing
you want to use from the Name list.
in the Name list.
2-1