Effect Function; Cursor/Stamp - Epson EMP-715 Owner's Manual

I Effect Function
Effects can be added to the presentation images with the use of the [Effect] buttons on the
remote control. The effects used can be amended on the [Effect] screen

Cursor/Stamp

Imprints a stamp on the image.
1
Press the [1] button on the remote control.
The Cursor/Stamp will be displayed.
2
Lower the [Enter] button on the remote control unit to move the position of the cursor/
stamp.
3
The stamp will be imprinted at the location of the cursor when the [Enter] button on the
remote control unit has been pressed.
Point
· The effect function will be canceled and the cursor will disappear when the [Esc] or [5]
button is pressed.
· The mouse cannot be used when the effect function is in progress.

50 - Effect Function

Power
Freeze
A/V Mute
R/C ON
E-Zoom
OFF
3
Enter
Esc
.
(see page 61)