Craftsman 486.241320 Owner's Manual page 6

FIGURE 9
HITCH PIN
HAIR PIN COTTER _t
1" DIA. x 3/4"
ASSEMBLY OF HOPPER BAG
Refer to carton contents figure on page 2 and figure
2 on page 3 for hardware needed to assemble
hopper bag,, See page 2 to identify both upper an_
lower hopper tubes_
Insert the left hand upper hopper tube through
the hopper bag stitched flaps, starting, at the
center cut out in the top of the hopper bag.. See
figures 10, 11 and 12. Repeat for the right hand
upper hopper tube,
CENTER CUT OUT
START
UPPER HOPPER TUBE
{LEFT HAND SHOWN)
BAG FLAP I
FIGURE 10
2, Locate the hole on side of both upper hopper
tubes See figure 11 The bag wi!l require
piercing at these holes in a later step, Refer to
step 12 on page 8.
HOLE ON SIDE OF BOTH
UPPER HOPPER TUBES
COVERED BY BAG FLAP
FIGURE 11
6