On-Product Safety Labels - Craftsman 113.196380 Owner's Manual

Safety
On-Product Safety Labels
There are several safety labels on the saw.
They alert the user to hazards explained in
the manual and remind the user how to
avoid the hazard.
Note where they are located on the saw.
Read and follow the safety information
and instructions in these labels. Refer to
the manual for detailed explanations and
instructions.
At the outfeed side, to the right of the
guard near the saw handle is this safety
label to alert you to wrong way feed:
/
\
TO AVOIO _\
INJURY 00 \
NOTFEED \
MATERIAL INTO
CU'FrlNGTOOL '_
FROM THIS END \
On the infixed side of the guard is this safe-
ty label to remind you to lower the hold
down to just clear the top of the work-
piece for ripping:
On the rear of the yoke, visible from the
iiffeed side when the saw is in a rip position,
is this safety label to alert you to outfeed
zone hazard:
_kDANGER
10