Table of Contents
Advertisement
SAVE THESE INSTRUCTIONS
PRODUCT SPECIFICATIONS
MOTOR
Type............................................................................. Universal
Ampere........................................................................
Voltage........................................................................
Hz................................................................................
RPM (no load) ............................................................
Overload Protection....................................................
BLADE SIZE
Diameter......................................................................
Arbor Size.................................................................... 5/8 in.
SAW
Rip Capacity ................................................................ 24 in. Right
Maximum Cut Depth @ 90º ......................................... 3 in.
Maximum Cut Depth @ 45º ......................................... 2-1/2 in.
Maximum Diameter Dado ............................................ 6 in. (Stackable only)
Maximum Dado Cut Width ........................................... 1/2 in.
WARNING
!
To avoid electrical hazards, fire hazards or damage to the tool, use proper
circuit protection. This tool is wired at the factory for 120 Volt operation.
It must be connected to a 120 Volt / 15 Ampere time delay fuse or circuit
breaker. To avoid shock or fire, replace power cord immediately if it is worn,
cut or damaged in any way. Before using your tool, it is critical that you read
and understand these safety rules. Failure to follow these rules could result
in serious injury to you or damage to the tool.
PLEASE READ THE FOLLOWING: The manufacturer and/or distributor is
providing the buyer with a parts list and assembly diagram in this manual
as a reference tool only. Neither the manufacturer nor distributor make any
representation or warranty of any kind to the buyer regarding the accuracy of
the list or diagram or that buyer is qualified and able to make any repairs or
replace any parts of the product. The manufacturer and/or distributor expressly
recommend: that all repairs and/or part replacements only be undertaken by a
certified and licensed technician, and not by the buyer. The buyer assumes all risk
and liability, including injuries to persons and damage to property, associated with
and arising out of any attempt of the buyer at repairs or replacement of parts to
the product.
15.0 Amps
120 V AC
60 Hz
5000 RPM (No load)
Yes
10 in.
3
Advertisement
Table of Contents
