Craftsman 113.196380 Owner's Manual page 40

Controls
/ Screw
Guard p,_-J_J| j_
"°_nDo;Wn
HoldDown 2 _
Guard Clamp
/
Pawls/Riving
Knife Knob
Riving Knife
Bracket
Control
Guard Clamp
Screw
Guard
Hold Down
Knob
Hold Down
Riving Knife
Bracket
Function
Secures guard to motor; frees
guard for removal
Protects against contact with
upper blade; partially protects
against contact with lower
blade; acts as sawdust deflector
Frees hold down to move up
and down; locks hold down in
place
During ripping, acts as partial
barrier to infced side of blade;
keeps infeed side of workpiece
from fluttering; acts as sawdust
deflector
Prevents side to side movement
of riving knife and provides
means for adjusting alignment
Operation/Comments
Turn counterclockwise to
loosen, clockwise to tighten
Upper part remains fixed in
level position. Notch #I guard
fits securely into matching tab
on motor
Clear guard is moveable: fully
raise over fence to crosscut; See
Saw Handle; most workpieces
will automatically raise clear
guard during ripping; See
Guard Tab
Turn counterclocto,vise to
loosen, clockwise to tighten
For ripping, lower hold down to
top of workpiece surface, then
raise slightly and lock in place.
For crosscutting lock in fully
raised position
Loosen to align riving knife,
then tighten
4O