Xerox WorkCentre Pro 65 Reference Manual page 14

dc04cc0332
Customer Support
Structure of a PCL File that Includes Xerox Commands
This section illustrates the structure of a PCL file that includes Xerox commands. The
sections shown are taken from a typical PCL file used to access 2-sided printing, single
portrait stapling, and output to main tray (stacker) features of the WorkCentre Pro 65/75/90.
Note: To generate a complete PCL file that you can review and/or use to access
WorkCentre Pro 65/75/90 features, see "Using WordPad to Create a PS/PCL Printing
Feature File," later in this document.
Section 1 (Opening command, required for all files)
<ESC>%-12345X@PJL JOB
Section 2 (Options coded with additional PCL PJL commands)
@PJL SET COPIES=1
@PJL SET DENSITY=4
@PJL SET JOBOFFSET=ON
@Section 3 (XRXbegin – Opening comment statement, required)
@PJL COMMENT XRXbegin
Section 4 (Xerox Specific PJL commands)
@PJL COMMENT OID_ATT_OUTPUT OID_VAL_OUTPUT_PAGE_COLLATE;
@PJL COMMENT OID_ATT_JOB_OWNER "ROlivier";
@PJL COMMENT OID_ATT_JOB_NAME "Document";
@PJL COMMENT OID_ATT_START_SHEET OID_VAL_JOB_SHEET_FULL;
@PJL COMMENT OID_ATT_JOB_TYPE OID_VAL_JOB_TYPE_PRINT;
@PJL COMMENT XRXSTAPLE=PORTRAIT;
@PJL COMMENT OID_ATT_DEFAULT_MEDIUM_TYPE "System-Default";
@PJL COMMENT OID_ATT_DEFAULT_MEDIUM_COLOUR "White";
@PJL COMMENT OID_ATT_OUTPUT_BINS OID_VAL_OUTPUT_BIN_STACKER
@PJL COMMENT OID_ATT_PRINT_QUALITY OID_VAL_PRINT_QUALITY_NORMAL;
@PJL COMMENT OID_ATT_PUNCH 0;
Section 5 (XRXend - Closing statement for comment section, required)
@PJL COMMENT XRXend
Section 6 (PCL code used to invoke PCL Language)
@PJL ENTER LANGUAGE=PCL
Section 7 (Duplex option coded with PCL escape command)
_&l1S
Section 8 (Closing command, required at end of document)
<ESC>%-12345X
Page 14