Transporting The Printer - Epson Stylus Photo 2000P Printer Basics Manual

6. Wipe off ink from the rollers using the
dampened cleaning tool as shown.
If the paper ejects before you finish cleaning,
press the E load/eject button to feed another
sheet into the printer.
7. When you're finished, turn the printer off.

Transporting the Printer

If you move your printer some distance, you need to prepare it for transportation in
its original box or one of a similar size. Follow these steps:
1. Turn on the printer, wait until the print head
locks in the far right position, then turn off
the printer.
2. Unplug the power cord from the electrical
outlet. Then disconnect the printer cable
from the printer.
3. Remove any paper from the printer and
remove the paper support.
4. Open the printer cover. Secure the ink
cartridge holder to the printer with tape as
shown, then close the printer cover.
5. Close the cover, push in the output tray extensions, and close the tray.
6. Repack the printer and attachments in the original box using the protective
materials that came with it.
Keep the printer level as you transport it. After transporting it, remove the tape
securing the print head and test your printer. If you notice a decline in print quality,
clean the print head (see page 37) or align the print head (see page 43).
46
To avoid damage, always leave the ink cartridges installed when
transporting the printer. Be sure to remove the tape used in step 4 after
setting up the printer in its new location.
Tape the ink cartridge holder to
the printer case