Epson Stylus Photo 2000P Printer Basics Manual page 36

You see your printer's
Properties dialog box:
5. Click the
Main
necessary. Select the correct
Media Type setting for your
paper. (If you're not sure which
setting to use, see "Choosing
the Correct Media Type
Setting" on page 25.)
Also make sure the
PhotoEnhance
turned off, or it could affect
your margins.
6. Click the
Paper
7. Select these settings:
Roll Paper
Source; this leaves a margin
of at least 0.12 inch
(3 mm) on both sides of
your printout
or
Roll Paper–No Margins
you want to print your
image edge-to-edge
(available only at certain
paper widths: 4, 8.3, 8.5,
and 13 inches).
Choose a Page Size that matches the size of the document you created in your
application. (If necessary, select
your document size and give it a name.)
Select
Banner Mode
If you're printing more than one copy of the image and you want to
print a cutting line between copies, select Cut Sheet Mode, then
click the Print page frame checkbox.
tab, if
setting is
tab.
as the Paper
if
as the Roll Paper Option.
as the Page Size, then enter
User Defined
Click here
Select the correct
Media Type setting
for your paper
Make sure
PhotoEnhance
is turned off
Click here
Select an option
for roll paper
Choose a
Page Size that
matches your
document's size
Select
Banner Mode
31