Printing On Paper Cut From A Roll - Epson Stylus Photo 2000P Printer Basics Manual

Printing on Paper Cut from a Roll

If you want to print on paper cut from a roll without using the roll paper holder,
follow these steps:
1. Before loading the paper, cut it to the
desired length of your image plus two inches
for the necessary margins. Cut the edge
cleanly, at a 90-degree angle in each corner,
to ensure proper loading.
If you alter the paper's width
before printing, you may not be able
to print edge-to-edge; marginless printing is available
only at certain paper widths (4, 8.3, 8.5, and 12.95 inches).
2. To make loading easier, roll the
first several inches of the paper
backward to uncurl it. Use the
plastic sheet included with your
printer to prevent your hands from
marring the printable surface. (Or
you can just use a folded sheet of
paper.)
3. Remove the printer's paper support and
insert the cut sheet, printable side up, as far
as it will go. Slide the left edge guide
against the paper.
35