Solving Miscellaneous Printout Problems - Epson Stylus Photo 2000P Printer Basics Manual

Solving Miscellaneous Printout Problems

The margins are incorrect.
Make sure you've selected the
correct paper size in your printer
settings. See page 11 (Windows)
or page 15 (Macintosh).
Check your application's
instructions on selecting the
correct margins for your paper
size. The margins must be within
the printable area of the page. See
"Specifications" in your electronic
Reference Guide for more
information.
If you're printing on roll paper,
make sure you've selected either
or
Roll Paper Roll Paper–No
as your Paper Source to
Margins
get the margins you want. See
page 30 for details.
You see incorrect characters.
Make sure the interface cable is
securely connected and that the
cable meets the system
requirements on page 61 or
page 62. Then try printing again.
Make sure your printer is selected
in your application, or as the
Windows default printer or the
current printer in the Macintosh
Chooser.
If you're using a switch box with
your printer, connect the printer
directly to your computer and try
printing again.
The image size or position is
incorrect.
Make sure the paper and layout
options are set correctly; see page 7
(Windows) or page 13 (Macintosh)
for instructions on accessing the
settings.
The image is inverted, as if viewed
in a mirror.
Turn off
Flip Horizontal
Advanced dialog box (see page 19)
or the mirror setting in your
application software.
The printer prints blank pages.
Make sure you've selected the
correct paper size in your printer
settings. See page 11 (Windows)
or page 15 (Macintosh).
Make sure the print head nozzles
are not clogged. To clean the print
head, see page 37.
in the
57