Making Paper Settings - Epson Stylus Photo 2000P Printer Basics Manual

Making Paper Settings

Now click the
Paper
Click here
Make the following selections:
Set the Paper Source to
If your image is at least as wide as the paper, you can print it edge-to-edge ("bleed"
it to the left and right sides of the page) by selecting
(available only at certain paper widths: 4, 8.3, 8.5, and 13 inches). To print on
roll paper, see "Using Roll Paper" on page 27.
Choose the size of paper you're printing on (click the arrow to scroll through the
list).
Paper Size
Click to apply the new settings. Then do one of the following:
OK
If you see your application's Print dialog box, continue with the next section.
If you see a dialog box with a different name (such as Page Setup in Photoshop),
click again. Then select
OK
It's a good idea to check your settings before printing. Some applications
can override your printer's Paper Size and Orientation settings. If so, you
may have to reapply these settings before printing.
For details on other options—such as printing on custom paper sizes and choosing
image orientation—see your electronic Reference Guide (described on page 2).
tab to display the settings shown below:
Sheet Feeder
from the File menu.
Print
Select Sheet Feeder for printing on
single sheets of paper
Select the size of paper you loaded
if you're printing on single sheets of paper.
Sheet Feeder–No Margins
11