Making Paper Settings - Epson Stylus Photo 2000P Printer Basics Manual

Making Paper Settings

After creating your document in an application, such as Photoshop, you're ready to
print it using your EPSON printer.
From the File menu, click
box:
Make the following selections on the page setup dialog box (your dialog box may look
slightly different):
Make sure
EPSON Stylus Photo 2000P
incorrect, you need to select it in the Chooser; see the Start Here poster for
instructions.)
Set the Paper Source to
If your image is at least as wide as the paper, you can print it edge-to-edge ("bleed"
it to the left and right sides of the page) by selecting
(available only at certain paper widths: 4, 8.3, 8.5, and 12.95 inches). To print on
roll paper, see "Using Roll Paper" on page 27.
Choose the size of paper you're printing on (click the arrow to scroll through the
list).
Paper Size
Click to close the page setup dialog box and return to your application's
OK
window.
For details on other options—such as printing on custom paper sizes and choosing
image orientation—see your electronic Reference Guide (described on page 2).
. You see your application's page setup dialog
Page Setup
Verify your printer model here
is selected. (If the printer model is
if you're printing on single sheets of paper.
Sheet Feeder
Select your Paper Size,
Paper Source, Orientation,
and Printable Area settings
Click OK
Sheet Feeder–No Margins
15