Replacing An Ink Cartridge - Epson Stylus Photo 2000P Printer Basics Manual

Replacing an Ink Cartridge

When the B black or A color ink out light flashes, the indicated cartridge is low on
ink. This is a good time to make sure you have a new cartridge. When the light stays
on, the cartridge is empty and you need to replace it.
When an installed ink cartridge is more than six months old, you may also need to
replace it if you notice that your printouts don't look as good as they used to. If the
print quality doesn't improve after cleaning and aligning the print head, you can
replace one or both cartridges. To check the level of ink you have left, see the graphic
in the printer driver (Windows) or click the
EPSON Monitor 3 utility (Macintosh).
Use these EPSON ink cartridges within six months of installing them and before the
expiration date on the package:
Region
U.S.
Canada
When you need new ink cartridges, contact your dealer or call EPSON at
(800) 873-7766 or visit the EPSON Store at www.epsonstore.com (U.S. sales only).
In Canada, please call (800) 873-7766 for dealer referral.
40
You cannot print if either ink cartridge is empty. Leave the empty
cartridge installed in the printer until you have obtained a replacement;
otherwise the ink remaining in the print head nozzles may dry out.
To ensure good results, use genuine EPSON ink cartridges and do not
refill them. Other products may cause damage to your printer not
covered by EPSON's warranty.
The printer's first ink cartridges will run out of ink sooner than the
replacement cartridges. This is because the printer has to charge its ink
delivery system when cartridges are installed the first time.
To conserve ink, avoid cleaning the print head more often than
necessary, and always turn the printer off using the power button (not
from a power strip or external switch).
ink level icon in the printer driver or
Black ink cartridge
T015201
T015311
Color ink cartridge
T016201
T016311