Loading Envelopes - Epson Stylus Color II Reference Manual

3. Prepare the paper or transparency film as described on the
previous page.
4. If you are loading a stack of paper or transparencies, fan the
stack and then tap it on a flat surface to even the edges.
5. Before you load paper, make sure the printable surface faces
up. For coated papers, the printable side is whiter than the
other side. For glossy paper and transparencies, the
printable side is face up when the cut corner is positioned
as shown in the illustration below.
6. Change the Media Type and other printer driver settings so
they are appropriate for the paper or transparency film you
loaded. (For instructions, see your Setup and Software Guide.)

Loading Envelopes

For detailed specifications on the thickness and weight of the
envelopes you can load, see Appendix A. Do not use envelopes
that are curled or folded, or ones that are too thin; they may
curl during printing. Also, do not choose 720 dpi resolution for
envelope printing.
1-10
Paper Handling