Epson Stylus Color II Reference Manual page 28

Alt + Print Mode (or Cleaning NNN)
Cleans the color print head; see "Cleaning the Print
Heads" in Chapter 3 for more information.
Load/Eject + POWER switch
Checks the paper length and performs a printer self
test. Hold down Load/Eject until the printer feeds a
page. See "Testing the Printer" in Chapter 1 of your
Setup and Software Guide for more information.
Load/Eject + Print Mode + POWER switch
When connected to a PC, prints a page containing a
hexadecimal representation (hex dump) of the data
sent to the printer for troubleshooting use; see
Chapter 4. Hold down Load/Eject and Print Mode
until the printer feeds a page. To exit hex dump
mode, press the Pause button and turn off the
printer. (If a partial page feeds before you press
Pause, press Load/Eject to clear the paper path.)
Alt + POWER switch
Prints a demonstration page of the printer's fonts
and colors. (Paper must be loaded in the printer.)
Hold down Alt until the printer feeds a page. To exit
demonstration mode, wait until the Pause light
comes on; then turn off the printer.
Economy/Condensed + POWER switch
Enters the printer's Default setting mode and prints
an instruction page; see the next section for more
information. Hold down Economy/Condensed
until the printer feeds a page. To exit Default setting
mode, press the Pause button and turn off the
printer. (If a partial page feeds before you press
Pause, press Load/Eject to clear the paper path.)
2-6
Controlling the Printer