Operation - Zenith IQVB425 Operating Manual & Warranty

PAGE 18 I CONTROLS AND DISPLAYS
nformation appears in the Front Pane[ DispLaydepending on the VCRfunction being used.
Counter memory indlcator
VCRindicator
Timerindicator
Recordindicator
Tape speed indicator \
x
Cassette indictor
Lights white a cassette is
inserted, flashes varying its speed
according to the tape operation,
and flashes white ejecting a
cassette
Leffaudio {eveIindicator
indicator
RemainlngtapeLength
indicator
Audio
program) indicator
Lights when pla_ng back the
Hi-Hsound.
ht audio [eve[ indicator
Front Pane[ Display shows which VCRfunction you are
using. For examp[e, when you pressSP/EP, SP or EP appears
to indicate the tape speed. As you change channels, the
channet numbers appear. The current time shows even white
theVCR isoff.
Auto Setup Message
SEARCH-- This messagewiLLbunk during auto setting.
No DATA-- After auto setting, if there is not channel that
is memorled, "No DATA"wiLL appear.
Ptayback Messages
A.TRK -- Tape tracking is being adjusted from VCR.
ALARM -- Turn VCROn and OFFto erase "ALARM" message.
If it is not erased, take VCRto an authorized repair center.
FF (Fast Forward) -- Tape is advancing rapidly.
CUE -- Tape is advancing rapidly in playback mode for visu-
aL search.
PLAY -- Tape is playing at norma[ ptayback speed.
PLAYX2 -- Tape is advancing at twice (X2) normal playback
speed.
REV -- Tape is reversing rapidly in playback mode for vlsua[
search.
REW (Rewind) -- Tape is rewinding rapidly.
SLOW -- Tape is praying at slow-motion forward speed.
STILL -- PLayback is haLted on one frame,
STOP -- Tape rewind or playback is stopped.
R, PLAY -- Tape is reversing at normal p_aybackspeed.
REV.X3 -- Tape is reversing at three (X3) times normal
playback speed.
R. SLOW -- Tape is p[aylng at stow-motion reverse speed.
Record Message
ALARM -- Turn VCROn and OFFto erase "ALARM"message.
If it is not erased, take VCRto an authorized repair center.
PAUSE-- Record mode is hatted.
STOP -- Recording is stopped.
Tuner Messages
AUX_ (Aux_tlen]_) -- AuxiUary channel is setected for
viewing equipment connected to Audio/Video jacks on front
or rear of the VCR.
CH _ -- VCR tuned to Channel.
HELLO -- VCRis turned on.