Zenith IQVB425 Operating Manual & Warranty page 38

PAGE 38 I TROUBLESHOOTING
Some quick and easy tips to fixing problems yourseLf.
Stereo Audio Record and/or PLayback Problems
Obsewed Condition
Stereo is not present.
Possible Cause
TV is not Stereo-compatible.
Program is not in stereo format.
VCRA/V Out jacks are not connected
to TV A/V In jacks.
VCR Audio_Video Out is not selected
for viewing at the TV.
VCRAUDIO RECORD mode is set to SAP
or MONAURAL.
Probable Solution
No action is possible.
No action is possible.
Make A/V connections. Stereo is
available only via A/V output from
VCR.
Select AUX or A/V source as _/input.
Set VCRAUDIO RECORD mode to
Stereo. See AUDIO Menu on page Z6.
Moisture Condensation
Moisture condensation can occur:
• When the video recorderis moved from a cold place to a
warm place.
• Under extremely humid conditions.
In locations where moisture condensation may occur:
• Keep the power cord plugged into an AC outlet and
POWEROn. This will help prevent condensation.
• When condensation has occurred, wait a few hoursfor the
VCRto dnj before using it.
Magnetic Field from Other Equipment
Keep the VCR and videotapes away from strong magnetic fields, such as those produced by a vacuum cleaner, refrigerator, or
air conditioner.
Video Head CLeaning
Your VCRautomatically cleans the heads as it is used. However, after Longperiods of use, your video heads may become
clogged with accumulated dirt, causing distortion. When this occurs, use a do-it-yourself wet-type head cleaning cassette
available from your Zenith dealer.
Caution:
Do not use a dpj-type head-cleaning system. It may seriously damage the VCRand cassettes used in the VCR.Snow, streaking
in picture, and horizontal pulling indicate the need lot professional video head cleaning. See your Zenith approved service
center for cleaning.
Cabinet Cleaning
CLean the outsidesurfaces of the VCR with a soft Lint-free cloth as required.Usecarenot to scratchthe VCRduringcleaning.