Zenith IQVB425 Operating Manual & Warranty page 34

PAGE 34 I OPERATION
This page explains how to use the Timer so that you can record while you are away.
SpeakEZ
CLOCK I
TIMER
SETUp
A_mIO
Press number keys
OUIT =ex8
MAIN MENU
Press 2
• PROGRAM []
MONTH:
DAY
START
STOP
CHANNEL :
SPEED :
REPEAT:
(1-8) _ sstect program
• ENTER 1o adjust program
TIMER MENU
for Program 1
mmm
r PROGRAM []
MONTH :
DAY
START
STOP
CHANNEL :
SPEED :
REPEAT:
(1-8) to select program
• ENTER to adjust program
TIMER MENU
for Program 8
Timer-controUed recording Lets you record shows
unattended. Pick a day and time up to one year in advance.
The show may be recorded once or on multiple days. You
can schedule up to eight different events into the PROGRAM
TIMER for recording, as tong as no events overlap in the
same time period.
TurnWand VCRon.
PLace VCR in VCRmodeby pressing the IV/VCR
button on the remoterepeatedly until the VCR
indicatortight appears in the VCR front panel
Select channel3 or4 at theIV.
Insert a VHS cassette t ape intothe VCR.
VCR 0perat|on with Timer Off or On
VCR TIMER
POWER STATUS VCR OPERATION
On Off Disables Timer-controlled
recording if an event is scheduled
in the Timer. Art other V_.R
operations can he used as
desired.
Off On (or set) Enables Timer-controlled
recording if an event is scheduled
in the Timer. You cannot operate
the VER manually whi[eitisin
TimerSetmode. Ifyou have
scheduled the Timer, you'll b e
recording a t a Later t ime.
Program events to be recorded with the Timer
by foLlowingthe procedure in the TIMER MENU
section. If you have a cable box, select channel
3 or 4 (ar the VCR) as the channet to be
recorded. Keep your cabLe box on when using
the Timer to record.
Enable the Timer by pressing POWER to turn off
the VER.The TIMER indicatoT light appears in
the VCRfront panel to indicate the VCRis in the
TIMER recording mode.