Zenith IQVB425 Operating Manual & Warranty page 29

OPERATION
I
PAGE 29
This page explains the basics of playing tapes in your VCR.
Automatic Playback (No Safety Tab)
1. Tape playback begins automatically, if the safety tab has
been removed from the cassette case. For example, most
rental movies have no safety tab. Simply insert the
prerecorded VHScassette into the VCR. Power wilt turn on
automatically and playback will begin.
2. Select the channel 3 or 4 at the TV or select the TV'sAUX
(Auxiliary) source to see the picture, if you are using the A/V
jacks. Refer to page 7 and 8.
Manual Playback (Has Safety Tab)
1. Press POWER to turn VCRon.
2. Insert a prerecorded VHS cassette into the VCR.
3. Press PLAYto begin playback.
4. SeLectthe channel 3 or 4 at the 1_/or select the W's AUX
(Auxiliary) source to see the picture, if you are using the A/V
jacks. Refer to your TV operating manual.
Unloading the Cassette from the VCR
1. PressSTOP if the tapeis playing,
2. PressSTOP/F2ECTat the VCR until the cassette is eJected.
Note:
ThisVCRrecordsonLy in SPandEPspeeds. Y ourVCR setsthe
playback speedautomaticaLLy to the speedusedto recordthe
tape,
(Continued on next page)
power stop/ej_
©
VCR's Controls
Cassette _ r_l _,
Safety Tab _ | }
Shown in
Place
• Cassette
Length I
T-30
TT:°l°2o
T-160
VHS Cassette Playback/Record Times
SP
(Standard Play)
30 Minutes
1 Hour
2 Hours
2 Hours,
40 Minutes
LP EP
(Long Play) (Extended Play)
1 Hour 1 Hour,
30 Minutes
2 Hours 3 Hours
4 Hours 6 Hours
5 Hours, 8 Hours
20 Minutes