Operation; The Buttons On Your Remote - Zenith VRD2125 Operating Manual

The Buttons on Your Remote

A quick list of all the buttons on your remote control and what they do.
CH (M/L) — Channel Selectors. Also selects AUX
A/V input channel.
CM SKIP — Fast forwards picture search through 30
seconds of recording.
EZ REVIEW — Replays twice a specification
segment.
EJECT — Ejects the tape from the VCR.
ENTER — Programs menu options and shows VCR
display.
F FWD (Fast Forward)—Advances tape rapidly.
MEMORY — Returns real-time tape counter to zero
(M 0:00:00).
MENU — Shows main menu.
Numbers — Chooses channels and enters
programming information.
PAUSE — Pauses tape temporarily during playback
or record.
PLAY — Begins tape playback.
POWER — Turns VCR On and Off. Also turns VCR
Timer Off and On, if programmed.
QUIT — Exits menu system.
REC/ITR — Begins tape recording.
REW — Rewinds tape to the beginning.
SP/EP — Chooses tape recording speed.
STOP — Cancels playback or record modes.
TRK (+/-) — Adjusts tape playback tracking.
TV/VCR — Switches source of TV picture between TV
channel and VCR channel selection. VCR
functions are available in VCR mode.
Turns VCR
On/Off
power
Exits Any Menu
Shows main menu
Enters a Menu
Tape Play Options
rew
1
Direct Channel and
Programming Entry
4
7
EZ review
Replays twice a
specified segment.
Installing Batteries
Be sure to install the batteries
provided with this remote. Match
positive (+) and negative (-) with
markings shown in battery
compartment.
Note: All VCR operations and menu
options can be accessed by using
the remote control.
O P E R AT I O N P A G E 1 5
Ejects a tape
eject
Chooses Tape
Recording Speed
Begins tape recording
ch
enter
Channel Selectors
ch
Adjusts tape
pause
playback tracking.
f fwd
play
stop
Fast forwards picture
cm skip
2 3
search through 30
tv/vcr
5 6
seconds of recording
8 9 0
memory
Switches TV Picture
between TV and VCR
Channel Selectors
(Tuner)
Accesses Tape Counter
Display