Zenith IQVB425 Operating Manual & Warranty page 28

PAGE 28 I OPERATION
This page describes how to connect a camcorderto your VCR.
FrontPanelof StereoVCR
Mo_
• If • *
A/Vcable is notYovlded with VCR.
SeLectAUX for Viewing an Audio/Video source Like a
Camcorder
1. With _/and VCRon, p|ace VCR in VCRmode by pressing the
I_//VCR button on the remote (and repeat) unlit the VCR
indicator Light appears in the VCR'sfront paneL.
2. SeLectchannel 3 (or 4) on the "iV. Note: If your TV has A/V
jacks, you may get a better picture if you connect your VCR
there. (Then, select the A/V source on the TV.)
3, At the VCR, Channel Down Lowerthan the Lowestchannel (or
Channel Up above the highest) to select "AUX2+. You can aLso
choose the SETUPmenu as described in "How to Access
Menus." on page g.
Press 3 for the SETUPmenu's SOURCE item.
Press 4 for AUX2, then ENTER.(Press QUIT/CC to exit.)
_k Turn off power or unpLug VCR
before making any connections,
SETUP MENU
SOURCE: TUNER (TV)
CATV
gAT_x'I BAUXE
Press number keys
then ENTER QUIT = exit
Press 4 to select AUX2
Items in the Menu
SOURCE Showsthe program source--W, CATV,or AUXTsetected for the VCRto receive.
TUNER The VCRis using its Tuner to receive programs from an antenna or cabLe.
TV SeLects programs for the VCRfrom a rooftop-type antenna.
CATV SeLectsprograms for the VCRfrom CabLeW.
AUXE SeLectsprograms for the VCRfrom the rear R-AUDIO-L--VIDEO IN jacks (where you may have connected your
camcorder).
AUX2 SeLectsprograms for the VCRfrom the front R-AUDIO-L--VIDEO TNjacks (where you may have connected your
camcorder).