Zenith IQVB425 Operating Manual & Warranty page 33

OPERATION J PAGE 33
Recording one show white watching another.
Note:
If you have a cable box connected to your VCR,you cannot
record one show and watch another.
Choosethe show you wish to record using the VCR'schannel
selector. Choosethe show you wish to watch using the W's
channel selector.
TurnW andVCRon.
PlaceVCR in VCR modebypressing the TV/VCR
buttonon the remote repeatedlyuntil,the VCR
indicatorlight appears in the VCR frontpane[.
Select channel 3 or 4 at the TV. If you have
connected your VCRto the TV'sA/V input jacks,
select the A_/source at the TV for a better
picture.
Select the channel to be watched and recorded
at. the VCR. ]:f you have a cable box, select the
cable box output channel (usually 3 or 4) at the
VCR. Select cable box channels at the cable box.
D
Tnsert a VHS cassette tape into the VCR.
PressSP/EP to select recording speed, if desired.
Recording speed is always SP, unless you select
EP.
Press REC/ITR until recording begins. REC
indicator Ught appears in the VCRfront panel.
Recording continues unU[ you reach the end of
the tape, or until you press STOPto stop
recording.
PLaceVCRin TV mode by pressingthe W/VCR
button on remote to turn off VCRindicator tight
in the VCR front panel.
Select the show you wish to watch using the
TV's channel selector.
Remote's Controls
power sp/ep recJitr stop!eJect
© © Q cZ)
VCR's Controls
OptionsYou CanUseWMte Recording
Instant Rocord|ng
Jnti[ end of tape)
PAUSE-
Momentarily pauses recording. Press PAUSE again to
resume recording.
STOP or STOP/E3ECT-
Stops and exits recording mode.
Note:
To return to the show you're recording, select channel 3 or 4
at the TV. PLace_:_eVCRin the VCR mode by pressing the
TV/VCR button on the remote to show the VCRindicator
Ught in the VCR'sfront panel.