Making The Electrical Connection; Use And Care - Windster WS-38U30SS Operation Manual

P. Making The Electrical Connection
1. Remove stainless Baffle filters. ( Ref.P8-H)
2. Remove screws on wiring case,
fish out wires through the
knockout. (Fig.12)
3. Mark the electrical connection by
fastening all wires to the existing
wall wiring according to the their
colors. (Black to Black, White to
White, Green to Ground)
4. After connection is done, reinstall wiring case cover and bottom board.
5. Turn on power and check operation of fan and light.
6. After completely installation, reinstall the stainless Baffle filter and oil collector.
( Ref. P8-H)
Q. Use and Care
Night light sensor
Main power
1. Main power button
NOTE: ALL FUNCTIONS CAN BE WORKED ONLY UNDER THE
MAIN POWER IS ON.
A. By pressing
B. By pressing
3 speed fan selection
, all functions are stand-by.
again, all functions will be turned off.
16
OFF
LED light
Fan OFF
wire case
Fig.12