3.USEFUL FUNCTIONS AND SETTINGS
[Color Settings] tab
On the [Color Settings] tab, you can make the following settings:
1) Saturation
This setting specifies the saturation of your scans. Select from -3 (dullest) to +3 (brightest) in increments of 1 on the
slide bar.
2) RGB Adjustment
This setting specifies each density of red (R), green (G) and blue (B) in scanned images. Select from -4 (lowest) to +4
(highest) in increments of 1 on the slide bar.
1
2
3 USEFUL FUNCTIONS AND SETTINGS
Changing Scan Settings
19