Programming For Operator Panel; Display On Operator Panel; Simple Display Program - Epson RC170 Manual

Epson rc170 printer operator panel

Hide thumbs Also See for RC170:

Table of Contents

5. Programming for Operator Panel

The application screen of the Operator Panel is provided with a text display of 34 characters

× 10 lines in size. This text display can display numerical values and strings from the

application program. Use the Print command to display.

Execute the following program in the environment where the Operator Panel is installed:

Function main

Print #23, "Hello, world"

Fend

"Hello, world" is displayed on the Operator Panel. If the program is executed again, "Hello,

world" is displayed on the next line of the display.

Next, execute the following program:

Function main

Integer i

Cls #23

For i=0 to 15

Next i

Fend

Operator Panel displays 0 through to 15 in the order. When 15 is displayed, several of the

first lines on the display disappear.

By executing Print several times on the Operator Panel from the application program, old

Print results are automatically pushed off from the display area, and only the latest ten lines

of the Print results is displayed on the screen.

OP1 Rev.1a

Print #23, i

Wait 0.5

5. Programming for Operator Panel

Table of Contents

Op1