Table of Contents
Advertisement
—if the CFM for your static pressure loss is
below the requirement of the machine, then
that line will not effectively collect the dust.
you must then modify some of the factors
in that line to reduce the static pressure
loss. Some of the ways to do this include 1)
installing larger duct, 2) reducing amount of
flexible duct used, 3) increasing machine
dust port size, 4) moving machine closer to
dust collector to eliminate duct length, and
5) reducing 90˚ elbows or replacing them
with 45˚ elbows.
Model g0703/g0703p (Mfg. Since 3/12)
example materials list
After the system is designed, create a materials
list of all the items you will need to build your dust
collection sytem. this will make it easy when it
comes time to purchase the materials.
Below is an example of some items that might be
needed. refer to accessories for dust collection
components available through grizzly.com.
description
6" rigid pipe at 20'
4" rigid pipe at 10'
4" Flex hose at 5'
6" 45° y-Branch
4" 45° Elbow
model
Quantity
g7364
4
g6162
2
h7215
6
g7353
6
g6167
6
-31-
Advertisement
Table of Contents
