Page 2
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.
Machine For your convenience, we post all available man- uals and manual updates for free on our website at www.grizzly.com. any updates to your model of machine will be reflected in these documents as soon as they are complete.
Caster inlet Connector to reduce the risk of serious injury when using this machine, read and understand manual before beginning any operations. figure 2. Model g0562z/g1030z2 identification. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) identification Canister Filter Collector outlet Connector Collection inlet...
3 hp 240V single-phase 3450 rpM 60 hz Direct Drive shielded & permanently lubricated Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) g1030z2/g1030z2p 156 lbs. 49-1/2 x 21-1/2 x 78 in. 170 lbs. 51 x 22 x 23 in. not applicable 6 ft.
Page 7
Color other height with Bags inflated iso Factory Country of origin Warranty serial number location assembly time awards Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) g0562z/g0562zp Canister 2320 CFM 16.9 in. 7 in. 4 in. 11.4 cu. ft. 1 Micron 5.7 cu. ft.
NOTICE This symbol is used to alert the user to useful information about proper operation of the machine. safety instructions for machinery OWNER’S MANUAL. EYE PROTECTION. HAZARDOUS DUST. WEARING PROPER APPAREL. HEARING PROTECTION. MENTAL ALERTNESS. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+)
Page 9
ONLY USE AS INTENDED. USE RECOMMENDED ACCESSORIES. CHILDREN & BYSTANDERS. REMOVE ADJUSTING TOOLS. SECURING WORKPIECE. FEED DIRECTION. FORCING MACHINERY. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) GUARDS & COVERS. NEVER STAND ON MACHINE. STABLE MACHINE. AWKWARD POSITIONS. UNATTENDED OPERATION. MAINTAIN WITH CARE.
240v ... 12 amps Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) Serious injury could occur if you connect the machine to power before completing the setup process. DO NOT connect to power until instructed later in this manual.
Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) needed for setup the following are needed to complete the setup process, but are not included with your machine: description •...
Collection Bags (g1030z2/z2p) ... 2 Canister Filter (g0562z/zp) ... 2 b. Canister Filter handle (g0562z/zp) ... 2 figure 4. upper collection bag (g1030z2/z2p). figure 5. Canister filter items (g0562z/zp). NOTICE If you cannot find an item on this list, care- fully check the machine and the packaging materials.
Space Allocation See below for required space allocation. Children or untrained people may be seriously injured by this machine. Only install in an access restricted location. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) Physical Environment Electrical Installation Lighting ⁄ " figure 8. Minimum working clearances.
11. positioning impeller outlet gasket. secure the metal "y" outlet to the impeller outlet with (8) shown in figure 12. ⁄ "-18 x figure 12. outlet connector installed. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) ⁄ "-18 x ⁄ " flange bolts, as "y" outlet...
Page 17
7 & 8 for the other collector. ⁄ "-18 x ⁄ " the assembly should now look similar to figure 16. figure 16. Collectors installed (g0562z shown). ⁄ "-18 x ⁄ " flange screws, ⁄ "-18 x ⁄...
Page 18
(see figure 17). figure 21. installed canister. d. repeat a–c for the other canister. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+)
Page 19
Clamp figure 23. upper collection bag secured. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) 14. hook the clear collection bag on the hooks around the bottom of the collector to hold the bag in place for the next step.
Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) turn the machine OFF. remove the switch disabling key, as shown in figure 28. figure 28. removing switch key from paddle switch.
29. figure 30. Example of flexible metal duct. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) there are also many kinds of pure plastic flexible hose, such as non-perforated drainage type hose and dryer vent hose. Drainage type hose, while being economical, does not quite have the flex- ibility required for dust collection.
Workshop Planner will allow you to quickly and easily draw and print a basic shop layout. Don't worry, non-grizzly brand machines can be substituted with grizzly machines for layout pur- poses. note: After you're finished, make sure to save your layout for later modification.
9" 10" figure 35. approximate required airflow for machines, based on dust port size. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) if the machine doesn't have a built-in dust port, use figure 36 to determine which size of dust port to install.
1000 figure 40. Branch line sizing chart by total CFM (for use when multiple machines share line). Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) 4" 4" 5" 5" 6" 6"...
0.405 0.203 0.297 figure 41. static pressure loss charts. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) in most small/medium shops it is only necessary to calculate the line with the longest duct length or the most fittings (operating under the assumption that if the line with the highest resistance works, the others will be fine).
Page 29
Blast gate Copper ground Wire figure 44. ground jumper wire when using plastic blast gates and metal duct. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) External ground Wire internal ground Wire Flex-hose figure 45. Flex-hose grounded to machine. We also recommend wrapping the outside of all...
NOTICE refer to the newest copy of the grizzly catalog for other accessories available for this machine. t20543— plastic bottom bag this 41" x 31" Flat (19.75" Diameter) plastic...
Page 32
5' rigid metal flex hose this flex hose provides just enough flexibility to make difficult connections while still keep- ing the inside wall as smooth as possible to minimize static pressure loss. figure 52. rigid Metal Flex hose. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+)
Page 33
4" through 9". figure 54. Metal reducers & adapters. metal elbows these industrial metal elbows are available from 4"–8" with 90˚, 60˚, 45˚, or 30˚ curves. Call (800) 523-4777 or visit www.grizzly. com for more information and pricing. 90° 30° 45°...
Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) cleaning canister filter to clean the canister filter on the Model g0562z/ g0562zp, move the canister cleaning handle back and forth to free the trapped dust particles from the filter pleats (see figure 58). the particles will fall into the collection bag.
2. Bag clamps are loose or damaged. collector. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+) possible solution 1. Empty collection bags. 2. Clean filter. 3. remove restriction in the duct line. a plumbing snake may be necessary.
You can view these pages in color at www.grizzly.com. -36- Note: Please gather the serial number and manufacture date of your WIRE/COMPONENT DAMAGE. MOTOR WIRING. CAPACITORS/INVERTERS. EXPERIENCING DIFFICULTIES. Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+)
10: parts g0562z/g1030z2 main breakdown see h5783 parts Breakdown on page 39 G1030Z2 G0562Z G1030Z2 G0562Z -38- Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+)
The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop better products and services. Of course, all information is strictly confidential. Note: We never use names more than 3 times. _____________________________________________________________________ _________________________________________________________________________________ _________________________________________________________________________________...
Page 48
Buy Direct and Save with Grizzly – Trusted, Proven and a Great Value! ® ~Since 1983~ Visit Our Website Today For Current Specials! ORDER 24 HOURS A DAY! 1-800-523-4777...