Power Connection; Connecting Power; Disconnecting Power - Grizzly g0703 Owner's Manual

power connection

After you have completed all previous setup
instructions and circuit requirements, the machine
is ready to be connected to the power supply.
To avoid unexpected startups or property dam-
age, use the following steps whenever connecting
or disconnecting the machine.
NOTICE
the model g0703/g0703p is prewired for
110v. if you plan to operate the machine at
220v, the motor must be rewired (see page
12) and a 220v switch must be installed.

connecting power

1. Turn the machine power switch OFF.
2. Insert the power cord plug into a matching
power supply receptacle. The machine is
now connected to the power source.
figure 28. Connecting power.
-22-

disconnecting power

1. Turn the machine power switch OFF.
2. Grasp the molded plug and pull it completely
out of the receptacle. Do not pull by the cord
as this may damage the wires inside.
figure 29. Disconnecting power.
Model g0703/g0703p (Mfg. Since 3/12)