Grizzly g0703 Owner's Manual page 21

8. install the handle with (4)
bolts and (4) ⁄
5
16
figure 17.
x 4
figure 17. installing the hand rail.
9.
install the hand crank on the shaft with (1)
⁄ "-18 x ⁄ " hex bolt and (1)
5 3
16 4
as shown in figure 18.
figure 18. hand crank installation.
Model g0703/g0703p (Mfg. Since 3/12)
⁄ "-18 x ⁄ " hex
5 3
16 4
" washers, as shown in
handle
⁄ " flat washer,
5
16
10. Attach the casters to the bottom of the drum
using (4) ⁄ "-16 nuts, (4)
3
8
(4) ⁄ " lock washers (see figure 19).
3
8
x 4
figure 19. dust collection drum casters installed.
11. Attach the lid latches to the side of the drum
extender using (6) #10-24 x
screws and (6) #10-24 hex nuts, as shown in
figure 20.
note: To avoid bag snags, place the screw
heads inside of the drum with the shanks fac-
ing outward, as shown in Figure 20.
figure 20. lid latch installation.
⁄ " flat washers, and
3
8
⁄ " phillips head
3
8
x 6
-19-