Table of Contents
Advertisement
You can also access the International characters by using a
Chapter 4 for an explanation of control codes and Appendix
code. See
B for the appropriate code.
Table
1-2.
Country
U.S.A.
France
Germany
England
Denmark
Sweden
Italy
Spain
1-4 - This switch controls the automatic line feed. The factory-
Switch
set condition is OFF which means the computer must send line feeds.
When this switch is ON, the printer performs an automatic line feed
with each carriage return.
If you are not sure if your computer sends a line-feed code to the
printer at the end of each print line, leave the switch the way you find
it. You can change this switch if your first printing occurs all on one
line or with the lines spaced twice as far apart as you requested.
Switch 2
The P-80 uses the RS-232C serial interface to communicate data
from your computer to the printer. The switches which make up
switch 2 are used to set up the proper serial communications for the
RS-232C serial port.
The factory-set condition is shown in Table l-3 and should be
appropriate for most computers. If you have any problems getting
data to print correctly from your computer, consult your computer
manual or ask your dealer.
International character switch settings
SW 1-1
ON
OFF
ON
OFF
ON
OFF
ON
OFF
control
SW 1-3
SW 1-2
ON
ON
ON
ON
OFF
ON
OFF
ON
ON
OFF
ON
OFF
OFF
OFF
OFF
OFF
11
Advertisement
Table of Contents
