Table of Contents
Advertisement
5. Place the new nickel cadmium battery into the battery holder with
the connector cable at the bottom. Insert the battery connector into
the slot marked CN7.
6. To reinstall the battery holder cover, you first need to remove the
front cover.
7. Push the battery holder cover back into place, at the back of the
printer, seeing that the tabs on each side are inside the cover, and
the switches and indicator light fit properly in their slots (Figure
2-7).
Figure 2-7. Replacing the battery holder cover
8. Replace the two screws at the back of the cover and replace the
front cover.
WARNING: Do not disassemble the battery or throw it into a fire.
21
Advertisement
Table of Contents
