Setting The Channels; Control - Sony WEGA KLV-21SR2 Operating Instructions Manual

Installing and Connecting tile TV
Setting the Channels
After you finish connecting your TV, you can run
Auto Program to set up your channels. The Auto
Program screen appears when you turn your TV on
for the first time after installing it.
To skip channels, see page 21.
Auto Program is set to scan cable TV channels by
default. To watch UHF channels with an antenna, see
"To watch UHF channels with an antenna" below.
To
1
2
3
4
perform Auto Program again
Press MENU.
Press i_/t_ to select _ (Channel), then press
(SD.
Press i_/t_ to select "Auto Program," then press
GD.
Press "OK."
"Auto Program" appears and the TV starts
scanning and presetting channels automatically.
When all the receivable channels are stored, the
"Channel Skip/Add" menu appears. Using this
menu, you can start skipping unwanted channels
(See "To skip channels" on page 21).
5 Press MENU to exit the menu screen.
2
To cancel Auto Program
While "Auto Program" is displayed in step 3, press
MENU on the remote control.
Note
To watch cable TV channels, you have to subscribe to a cable
TV company. Note that cable TV cannot be received in some
areas. This TV receives 1- 125 cable TV channels. For details on
cable TV subscription, consult your nearest cable TV company.
1
Press I (power) on the TV. The Auto Setup menu
appears.
The Auto Setup menu automatically appears on
the screen when you turn on the TV for the first
time.
Auto Program: [CH+]
Exit: [CH-)
First please connect
cable/antenna
2 Press CH+ on the remote control or on the front
panel of your TV to perform Auto Program.
When all the receivable channels are stored, the
"Channel Skip/Add" menu appears.
To watch UHF channels with an antenna
1 Press
MENU.
2
Press IUt_ to select _ (Channel), then press
GD.
:3 Press i_/t_ to select "Cable," then press (SD.
4 Press t_/t_ to select "Off," then press (5}D.
5 Perform step 3 in "To perform Auto Program
again" above.
Note
You cannot receive and set the cable TV channels and UHF
channels at the same time.
Tip
When you have a cable box or satellite receiver connected, the
Channel Fix feature is useful. For details, see page 21.
2O