Connecting A Digital Satellite Receiver - Sony WEGA KLV-21SR2 Operating Instructions Manual

Installing and Connecting tile TV
Connecting a Digital Satellite Receiver
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the Digital Satellite Receiver's
Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3
IN connections.
Note
This TV supports only the 480i and 480p signal format. If the TV receives a signal other
than 480i or 480p, "Non Supported Video Format" appears on the screen.
2 Using an AUD10 cable, connect the Digital Satellite Receiver's AUD10
OUT jacks to the TV's AUDIO IN jacks.
Note
The Y, P_ and PR jacks do not provide audio, so audio cables must be connected to
provide sound.
Rear of TV
t
__ AUDIO'-L
_ \-Jl -o- (white)
"_°°' ..................... AUDIO-R
(red)
2
Digital Satellite
Receiver
(e.g. SAT-HD200,
SAT-HD300, etc)
Component ......................
video cable
(not supplied)
18