Installing The Printer Software - Epson Stylus Color 850 User Manual

Installing the printer software

Follow the steps below to install your printer software. If you
are using the floppy disk version, make a backup copy of the
EPSON Macintosh printer software disk before you begin
installation.
1. Turn on your Macintosh and insert the software CD in the
CD-ROM drive. (If you use the floppy disk version, insert it in
a disk drive.)
The EPSON printer software disk opens automatically.
2. If a single Installer icon appears, double-click the icon. If
separate folders containing installer icons for several
languages appear, double-click the folder for your
preferred language, then open the Disk 1 folder and
double-click the Installer icon inside it.
3. After the initial screen appears, click Continue. The following
dialog box appears.
4. If you want to install all of the printer software included on
your printer software CD-ROM, make sure the Install
Location box shows the correct disk drive and click Install.
2-30
Getting Started