Epson Stylus Color 850 User Manual page 159

A "SC 850 (or SC 850 (AT))cannot be used" error appears.
(Macintosh only)
Cause
The printer driver has been
corrupted.
Printing starts too high or too low on the page.
Cause
Margins are set incorrectly in
your application.
9-12
Troubleshooting
If you have a display-adapter setting
utility, use it to set lower resolution.
For detailed information, see your
display board user's guide.
For Macintosh, choose Control Panel
from the Apple menu and select
Monitors. Select a lower resolution.
For detailed information on making
this setting, see your Macintosh user's
guide.
What to do
Remove and reinstall the driver: From
the printer software floppy disk or
CD-ROM, click Installer, click
Continue, and select Remove from the
pop-up list that displays "Easy
Install." Then click Remove. Click
Continue, if necessary, and click
Restart. See page 2-30 for instructions
on installing the printer driver.
What to do
Check that the margins are set
correctly in your program. See the
printable area specifications on page
C-6.