Energy Star Compliance - Epson Stylus Color 850 User Manual

G
Do not dismantle the ink cartridges or try to refill them.
This could damage the print heads.
G
Once you install an ink cartridge, do not open the clamp or
remove the cartridge except to replace it. The cartridge may
become unusable otherwise.
G
Install the ink cartridge immediately after you remove it
from its package. Leaving the cartridge unpacked for a long
time before use may reduce print quality.
G
Do not use an ink cartridge beyond the date printed on the
cartridge carton. For best results, use up the ink cartridges
within six months of installing them.
G
Do not shake an ink cartridge; this can cause leakage.
G
Always turn the printer off using the P power button.
When this button is pressed, the P power light flashes
briefly. Do not unplug the printer or turn off the power to
the outlet until the P power light is off.
G
Before transporting the printer, make sure the print heads
are in the home (far right) position and the ink cartridges
are in place.
E
NERGY
As an
determined that this product meets the
S
TAR guidelines for energy efficiency.
The International
is a voluntary partnership with the computer and office
equipment industry to promote the introduction of
energy-efficient personal computers, monitors, printers, fax
machines, and copiers in an effort to reduce air pollution
caused by power generation.
S
TAR Compliance
E S
NERGY TAR Partner, EPSON has
E S
NERGY TAR Office Equipment Program
E
NERGY
Safety Instructions
3