Epson Stylus Color 850 User Manual page 178

5. Click the Resources tab and click the Use automatic
settings check box to deselect the Automatic Setting. Write
down the Input/Output Range addresses shown in the
Resource settings box.
6. Select a basic configuration setting from the Setting Based on
list that uses the same Input/Output Range addresses as
you wrote down in Step 5, and make sure the Direct
Memory Access channel and Interrupt Request numbers
are allocated and displayed. Confirm also that the
Conflicting Device list box shows No conflicts.
Write down these
addresses
Click here to remove
the checkmark
Select a configuration
setting
Confirm there are no
conflicts
Troubleshooting
9
9-31