Download Print this page

Epson Stylus Color 850 Start Here Manual

Epson stylus color 850: quick start.
Hide thumbs
   

Advertisement

To get up and running with your
EPSON Stylus
1
Set up the
printer
2
Install the
software that
runs your printer
3
Print a color
image (optional)
If you need help as you set up your printer, see
''Troubleshooting'' in your User's Guide .
®
COLOR 850,
you'll need to:
1
2
3
2
2
2
Your printer
Your printer
Your printer
software
software
software
To print this image, see step 3 in your Start Here guide for step-by-step instructions. Be
sure to use the EPSON Photo Quality Glossy Paper found in your free EPSON Media Pack.
®
This sheet was printed on a conventional printing press, but is representative of the quality
of output you'll get using your EPSON Stylus COLOR 850 and Photo Quality Glossy Paper.
®
3/98
Copyright © 1998 by Epson America, Inc.
CPD-6451
CPD-6233

Advertisement

   Related Manuals for Epson Stylus Color 850

   Summary of Contents for Epson Stylus Color 850

  • Page 1

    To print this image, see step 3 in your Start Here guide for step-by-step instructions. Be sure to use the EPSON Photo Quality Glossy Paper found in your free EPSON Media Pack. ® This sheet was printed on a conventional printing press, but is representative of the quality of output you’ll get using your EPSON Stylus COLOR 850 and Photo Quality Glossy Paper.

  • Page 2: Unpack The Printer

    User’s Guide package a cable to connect the printer (not supplied) Note: To connect your printer to a PC, you need a shielded, twisted-pair parallel cable (6 to 10 feet long). To connect it to a Macintosh, need an Apple ®...

  • Page 3: Install The Ink Cartridges

    Place the black ink cartridge in the holder with the arrow on the top label facing the back of the printer. Then close the clamp, making sure it clicks into place. Caution: If the ink cartridge holder moves back to the right before you install the cartridge, don’t try moving it back by hand.

  • Page 4: Load Paper, Connecting To A Pc, Connecting To A Macintosh

    5 Connect the printer to your computer If you’re using an optional interface card in your printer, see Appendix A of your User’s Guide for instructions on installing it and connecting it to a network.

  • Page 5

    Print option in your application to change your printer settings. 1. Make sure your printer and computer are turned on and the EPSON printer software CD-ROM is in the drive. 2. Click Start, point to Programs, then point to The Print Shop PressWriter program folder and click the program icon.

  • Page 6

    Assets folder, click the car.psp file, and click Open. In a moment, the color image appears in the PressWriter window. 5. Click File in the menu bar and select Print to select your printer settings. You see the Print dialog box shown below.

Comments to this Manuals

Symbols: 0
Latest comments: