Character Table; Auto Line Feed - Epson Stylus Color 850 User Manual

AGM (Alternate Graphics Mode)
When AGM is on, the printer can use high-resolution 24-pin graphics
commands. The default is off. This feature is available when you select
IBM X24E emulation as the Software setting.

Character table

Character tables contain the characters and symbols used in different
languages. The printer prints text based on the selected character table.
For the available character tables, see Appendix C.

Auto line feed

When the Auto line feed feature is on, each carriage return (CR) code is
accompanied by a line feed (LF) code. If your printed text is unexpectedly
double-spaced, set this feature to Off. If text lines print on top of each
other, set it to On.
Network I/F mode
If your printer is connected to a single computer, leave this feature off. If
you want to share the printer with another computer, turn this feature on.
When this feature is on, data may be present in the printer's buffer even
though the printer is not printing. Always make sure the printer does not
receive data before turning off the printer.
Loading position
If you want to print more lines on a page, set this feature to 3 mm. If you
set the top margin with your software, that setting is added to the
default-setting value.
Economy
When Economy mode is on, the printer uses less ink by printing fewer
dots per character. Use this mode for rough drafts only.
Parallel I/F transfer rate
This setting specifies the I/F transfer rate. For most printing, leave this
setting set to Fast. If you encounter problems, set it to Normal.
A-6
Using the Printer with DOS