Installing In Windows 95 Or Windows Nt 4.0 - Epson Stylus Color 850 User Manual

If you wish to make a floppy disk version of the printer
software on your CD-ROM, you can use the Driver disk
creation utility included on the CD. See below for Windows 95
and NT 4.0, or page 2-19 for Windows 3.1.

Installing in Windows 95 or Windows NT 4.0

Follow the steps below to install the printer software in
Windows 95 or NT 4.0.
Note for Windows NT 4.0 users:
Printer driver installation may require network administration
privileges. Ask your network administrator for more details.
1. Make sure Windows 95 or NT 4.0 is running and the printer
is off.
2. Insert the printer software CD in the CD-ROM drive. (For
floppy disk users, insert it in the A: drive. Click Start, then
click Run. Type A:\SETUP and click OK.) If the dialog box
below appears, double-click Install Printer Driver/Utility.
Double-click
here to install
Double-click here to
make a floppy disk
version of the printer
software
If this dialog box does not appear, double-click the My
Computer icon, then double-click the CD-ROM drive icon
(or floppy disk drive icon for floppy disk users).
2-14
Getting Started