Epson Stylus Color 850 User Manual page 162

Software settings are
overriding those made in the
default-setting mode.
For DOS users:
The Network I/F mode is set
to Off.
The New Hardware Found screen appears even though the
printer software has already been installed.
Cause
This error may occur when
using Windows 95.
The print heads moved to the ink cartridge replacement
position unexpectedly.
Cause
Y X
The or cleaning button
was pressed while the B or A
light was flashing or on.
Always try making a setting in your
application first. If that is not possible,
use the printer driver. If that is also
impossible, use the default-setting
mode.
Set the Network I/F mode to On in
the default-setting mode. To enter the
default-setting mode, see "Changing
the Print Settings" in Appendix A.
What to do
Click the Do not install a driver
(Windows will not prompt you
again) button; then click OK.
What to do
One or both of the ink cartridges is
low or out of ink. Replace the ink
cartridges as described on page 8-2.
Troubleshooting
9
9-15