Installing The Printer Software In Windows 98, 95, 2000, Or Nt; Installing The Printer Software In Windows 98; 2000, Or Nt 4.0 - Epson LQ-680 User Manual

Installing the printer software in Windows 98, 95,

2000, or NT 4.0

Follow the steps below to install the printer software in
Windows 98, 95, 2000, or NT 4.0:
Note:
Installing the printer software for Windows 2000 or NT 4.0 may
require administrator privileges. If you have problems, ask your
administrator for more information.
If you wish to make a diskette version of the printer software on your
CD-ROM, insert the CD and run the EPSETUP program. In the
dialog box that appears, click the Driver disk creation utility
button and follow the on-screen instructions.
If you are using the diskette version of the EPSON software, make
a backup copy of the EPSON printer software disk or disks before
you begin installation.
If the New Hardware Found screen or any other wizard appears
when you turn on your computer, click Cancel and follow the steps
below.
If the Digital Signature Not Found screen appears, click Yes. If you
click No, you must reinstall the printer driver as described below.
Installation time varies depending on your computer.
1. Make sure Windows 98, 95, 2000, or NT 4.0 is running and the
printer is off.
2. Insert the printer software CD-ROM in the CD-ROM drive.
The Install dialog box appears. (If you are using diskettes,
insert the diskette in a disk drive, then double-click the Drive
icon and double-click the Setup.exe icon.)
Setting Up the Printer
1
1-13