Removing the Mainboard
1. Perform the
described on pages
2. If a WLAN module is installed, remove it. Perform the
procedure described on pages 3-19.
3. Perform the
4. Perform the
page 3-25.
5. Detach the transparent tape securing the LCD cable (1), and then disconnect the LCD (2)
and microphone (3) cables from the mainboard.
6. Disconnect the speaker cable from the mainboard.
Machine Maintenance
Downloaded from
www.Manualslib.com
"Removing the ODD
3-11
and
"Removing the
Keyboard" procedure described on page 3-23.
"Removing the Palmrest Module/Upper
Figure 1-51. LCD Cable Tape, LCD Cable and Microphone Cable
Figure 1-52. Speaker Cable
manuals search engine
Module" and
"Removing the HDD
3-15
respectively.
"Removing the WLAN
Cover" procedure described on
0
Module" procedures
Module"
3-37