Setting A Password - Acer AN515-51 Service Manual

Setting a Password

Perform the following to set the supervisor password:
↑
Use the and
1.
Enter. The Set Supervisor Password dialog box appears.
Type the password in the Enter New Password field.
2.
NOTE:
Passwords are not case sensitive and the length must not exceed 12 characters. The
following characters may be used in a password.
IMPORTANT:
Use care when typing a password. Characters do not appear on the screen.
Retype the password in the Confirm New Password field.
3.
Press Enter. The Setup Notice dialog box appears.
4.
2-12
↓
keys to highlight the Set Supervisor Password parameter and press
Figure 2-8. Set Supervisor Password
A - Z Alphabets A through Z (Not Case Sensitive)
0 - 9 Numerical Characters
- Dash
= Equal Sign
[ Left Bracket
] Right Bracket
. Period
, Comma
; Semi-colon
/ Slash
\ Back-slash
Figure 2-9. Setup Notice
System Utilities